Complete biscuit production line supplier today? With the continuous development of science and technology, fully automatic, high efficiency, low energy consumption, and low lobar equipment are really suitable for manufacturers. Our biscuit production line can achieve all the above conditions, but also to achieve customized design according to the customer’s factory environment. Larger biscuit makers with substantial production facilities, experience, and investment in development may lead the way to future improvements in product quality and production efficiencies. Smaller local teams may manufacture and install the ovens. Read extra information on biscuit making machine. Apart from the integrated system hardware service, the services Golden Bake offers include all stages: from plant design, biscuit machinery construction, manufacture, and assembly up to the smooth commissioning phase at your site. Don’t be afraid to start a new project…
Adopting with pneumatic conveying system for transport powder in sealed pipe. Due to the weight measurement method, error less than 1kg. No dead angle in pipe without using screw conveyor. Adopting with pump conveying system for transport liquid in sealed pipe. Due to the weight measurement method, error less than 1kg. Avoid the error caused by the difference of material density and temperature in different batch, we don’t using flow measurement.
With the development of the times, innovative smart turning conveyor from Golden bake ends problems by smart buckle?automatic tensioning device,cantilever frame and integrative guide and PU belt. First our turning conveyor need at most 20mins to replace the PU belt by 1 worker. Second our machine maintenance free. Third smart turning machine use hygienic and safety design. Fourth our turning conveyor has more than 12 months service life.
Horizontal mixing process must not develop the gluten in the flour, as this will result in a hard biscuit. Mixing is therefore done in two stages. In the first stage, all the ingredients are mixed except the flour and soda. The mixing continues until a consistent, homogenous cream is produced. It is important to keep the temperature of the dough low and chilled water is required for the mixer jacket.For the second stage,the flour and soda are added and mixed for 1minture at slow speed and 1-2minutes at high speed. The final dough temperature should be 18-22C.
These changes overlap during the baking process, but it is useful to note that the formation of the structure and texture of the biscuit will take place in the first and second temperature zone, the reduction in the moisture in the third temperature zone and the development of the color in the final temperature zone. The length of the baking oven depends on biscuit capacity customer wants. The length of the temperature zone depends on the biscuit. Different biscuit use different industrial biscuit oven. Common biscuit baking oven such as hybrid ovens and adjustable hot wind convection baking oven as below. Read even more details on https://www.foodsmachine.net/.