Custom wheel wholesale provider today: Unleash Performance: Ultimate Guide to Wheel Height & Offset! The importance of wheel height and offset. When shopping for car wheels, in addition to focusing on appearance and styling, the height and offset of the wheels are also very important factors. So, what exactly does the height and offset of a wheel mean? Firstly, the height of a wheel is the distance from the centre of the wheel to the rim, usually measured in inches or millimetres. It determines the area of the tyre in contact with the ground, which in turn has an impact on the vehicle’s handling, comfort and fuel economy. Generally speaking, low-height wheels are suitable for city driving, while high-height wheels are better suited for off-road conditions. Find additional information at https://www.jjjwheel.com/products-21612.
Gravity casting: Alloy aluminum is melted into liquid state and poured into the casting mold, after cooling and solidification, cleaning treatment to get the casting with predetermined shape, size and performance, after molding for mechanical processing (deburring, trimming appearance, polishing) and made. The casting wheels product needs to be molded according to the requirements, and the price is lower for mass production.
Fuel vehicle: If you use fully synthetic engine oil, a small maintenance every 10,000 kilometers, a single cost of 600 dollar, then 100,000 kilometers need to be maintained 10 times, the total cost is 6,000 dollar, a major maintenance every 30,000 kilometers, a major maintenance Counting 1,000, 100,000 kilometers of maintenance 3 times, the cost is 3,000, so calculated, the total maintenance cost of 100,000 kilometers is 9,000 dollar.
Forging process: It is to use the hot die forging press to forge a piece of heated aluminum alloy into a wheel at high pressure, so the molecules between the alloy will be closer, while avoiding the casting wheel loose, porous and other defects. Under the same conditions, forged wheels can be lighter while ensuring strength, and can provide higher strength under the same size and thickness, so simply put, they are high strength, light weight, relatively fuel efficient, and can improve handling. As JWHEEL is also a wholesale forged wheels manufacturers and supplier, we welcome bulk order inquiries.
We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating.
To sum up, it can be concluded that aluminum wheels are the product of “high-speed”, “energy-saving” and “modern fashion” of automobiles. With the rapid development and development of the automobile market, aluminum wheels are used to gradually replace the traditional steel ring. The trend has become more and more intense, and there is an infinitely broad market prospect. Many people usually choose a wheel that is larger than the original product when buying a new wheel. The first thing to pay attention to is that the tire and the wheel are two inseparable parts. During the modification process, try to keep the extension diameter of the tire. It is necessary to remain unchanged or to keep the changes as small as possible. One of the main reasons is that if the deviation is too large, the accuracy of the meter will be problematic. It’s not feasible to just increase the wheel size without changing the tires. For example, if the tire size of the original car is 215/60R16 (16 means 16-inch wheels), then if you change to 17-inch wheels, the new tire size should preferably be 225/55R17, or 225/50R17.
Mistake : take the wheel by “appearance”, ignore the hub parameters. The change of wheel hub style has an immediate effect on the appearance of the vehicle. But if only pay attention to the hub appearance did not pay attention to the hub parameters to match the original car data, it is easy to replace the hub and wing plate, calipers, shock scratch and even can not be loaded. The following important parameters of the wheel hub are related to the loading of the wheel hub, which needs special attention: Hole spacing (PCD) : must be exactly the same with the original car data. Offset: If the offset is not appropriate, the hub is easy to interfere with the shock absorber or wing plate. Center hole (CB/HUB) : If the center hole of the hub is small, it cannot be loaded at all. Size (Size) : the size of the modified hub should match the model. Too big or too small will have loading problems. Read extra information at jjjwheel.com.
The Flow-Forming Process: A Quick Overview: The flow-forming process is a manufacturing technology used to produce high-performance wheels. Using heat and pressure, the inner barrel of a cast wheel is stretched and compressed, enhancing its tensile strength and durability. Flow-formed wheels are an ideal option for car enthusiasts who want the style and strength of forged wheels but do not have the budget for them. With a combination of superb design options and affordability, flow-formed wheels offer an exceptional solution for performance enthusiasts. Additionally, their elongation characteristics and superior shock resistance make them a superior choice over traditional cast wheels. In sum, the flow-forming process is changing the game in the wheel industry as we know it.