Altitude valve water tank manufacturer 2024: How to Set an Altitude Valve? Setting an altitude valve correctly is crucial to ensure proper water flow and pressure regulation in a system. Here are some steps to guide you on how to set an altitude valve: Familiarize yourself with the manufacturer’s instructions: Each altitude valve may have specific guidelines for setting it up. Make sure you read and understand these instructions thoroughly before proceeding. Determine the desired water level: Based on your system’s requirements, identify the ideal water level at which you want the altitude valve to maintain. This will depend on factors such as building height and water usage. Adjust the pilot control settings: Altitude valves typically have a pilot control that regulates their operation. Use the appropriate tools to adjust this control according to your desired water level. Read extra information on altitude control valve.
The pressure relief valve is a type of valve used to control or limit the pressure in a system or vessel. Exhaust over-pressurization to protect downstream equipment or control the upstream pressure of gas or liquid. It maintains a constant downstream pressure, regardless of fluctuating demand and sustains the upstream pressure to a pre-determined minimum. As a quality pressue relief valve manufacturer, we provide pressure reducing and sustaining valve for sale. They automatically perform two independent functions. The pressure reducing pilot responds to slight variations in downstream pressure and immediately repositions the main valve to maintain the desired downstream pressure. The pressure sustaining pilot is normally held open by the upstream pressure and close when the pressure drop to the set point. We are pressure relief valve supplier for over 18 years, the pressure control relief valve usually used in lower elevation pipeline to guarantee prior use of higher elevation area.
The valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection; The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior; Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.
GV-Resilient seated gate valve is a soft seal disc which is fully encapsulated with rubber. The valve is designed with new technology for light operating, no clogging and no corrosion, good resilient memory & long service life. It can be used extensively in all kinds of water supply & sewage, fire-fighting and function as a shut-off or regulating valve. Features: Newly advanced design, less operation torgue & abrasion resistance; Body & Cover are made of high grade Ductile Iron; Disc is designed with an abrasion resistant nylon guide which can help less opening or closing torgue and smooth during operation; Forged stem provide stronger stem operation and less moving parts; Disc is covered by high-grade rubber which complies with drinking water; High-tech rubber curing with precise geometry dimensions, more resilient & strong adhesive to ductile casting; The 3 O-ring stem seals are designed to prevent stem leakage. and provide replacement of the O-ring without disassambling of valve from mainline pipes; Both inside & outside are coated with epoxy resin powder; Manufacturing standard meets BS EN 1074, BS 5163, BS EN 1171; F/F (Face to Face) meets the following standard: BS EN558-1. Read additional details on shsuotevalve.com.
What is an Altitude Valve? An altitude valve, also known as an altitude control valve or altitude regulator, is a type of valve used in water distribution systems. It is designed to maintain a specific water level or pressure within a storage tank or elevated structure. The purpose of an altitude valve is to control the flow of water into or out of a storage tank to maintain a predetermined level or pressure. It functions by automatically opening and closing based on changes in water level or pressure. When the water level or pressure drops below the desired set point, the altitude valve opens to allow water to flow into the tank, replenishing the supply. Conversely, when the water level or pressure rises above the set point, the valve closes to prevent overfilling or excessive pressure.
We are committed to producing the best quality products at the most competitive prices. Therefore, we sincerely invite all interested companies to contact us for more information. Our objective is “good quality for survival, good faith for development, using new technology to improve product quality”. Our valves are produced to the highest quality standards with modern manufacturing technology and astute materials sourcing. Most of our certificated products sell to over 36 cities in Europe, North America, South America, Africa, etc. As a full-service valve supplier, we have 18 years manufacturing experience in producing various industrial valves. Our production workshop based in China is equipped to provide a professional custom valve service.